Flashlight + SHT

 

 LHU-SHT-04 Double plastic swivelling holder for tactical police flashlights and for defensive spray

lhu-sht-04


LHU-SHT-04: Double plastic swivelling holder consists of the holders LHU-04 (for flashlight) and the holder SHT-04 (for defensive spray) connected by special adaptor. Advantage of this solution consists in saving the space on the belt. Constant position of the flashlight and spray improves orientation on the belt when choosing the appropriate device. Both holders rotate in respect to the belt simultaneously, while their mutual position remains unchanged. The adaptor makes it possible to accommodate easily the holders for carrying on the right or left side. Fastening clip ensures its fast fixation on the belt with one hand only without necessity of unbuckling the belt. The holder can be rotated in respect to the belt by full circle of 360 degrees with 16 locking positions.

 

 LHU-SHT-14 Double plastic swivelling holder for tactical police flashlights and for defensive spray

lhu-sht-14


LHU-SHT-14: Double plastic swivelling holder consists of the holders LHU-14 (for flashlight) and the holder SHT-14 (for defensive spray) connected by special adaptor. Advantage of this solution consists in saving the space on the belt. Constant position of the flashlight and spray improves orientation on the belt when choosing the appropriate device. Both holders rotate in respect to the belt simultaneously, while their mutual position remains unchanged. The adaptor makes it possible to accommodate easily the holders for carrying on the right or left side. This type of holder uses model of flat quick-coupling clip, which enables its rapid insertion on belt with one hand only without unbuckling the belt. However, the distance between the belt and holster is smaller with this type of clip. The holder can be rotated in respect to the belt by full circle of 360 degrees with 16 locking positions. It can be fastened also to the supporting M.O.L.L.E. system. 

 

 LH-SHT-04 Double plastic swivelling holder for tactical police flashlights and for defensive spray

lh-sht-04


LH-SHT-04: Double plastic swivelling holder consists of the holders LH-04 (for flashlight) and the holder SHT-04 (for defensive spray) connected by special adaptor. Advantage of this solution consists in saving the space on the belt. Constant position of the flashlight and spray improves orientation on the belt when choosing the appropriate device. Both holders rotate in respect to the belt simultaneously, while their mutual position remains unchanged. The adaptor makes it possible to accommodate easily the holders for carrying on the right or left side. Fastening clip ensures its fast fixation on the belt with one hand only without necessity of unbuckling the belt.  The holder can be rotated in respect to the belt by full circle of 360 degrees with 16 locking positions.

 

 LH-SHT-14 Double plastic swivelling holder for tactical police flashlights and for defensive spray

lh-sht-14


LH-SHT-14: Double plastic swivelling holder consists of the holders LH-14 (for flashlight) and the holder SHT-14 (for defensive spray) connected by special adaptor. Advantage of this solution consists in saving the space on the belt. Constant position of the flashlight and spray improves orientation on the belt when choosing the appropriate device. Both holders rotate in respect to the belt simultaneously, while their mutual position remains unchanged. The adaptor makes it possible to accommodate easily the holders for carrying on the right or left side. This type of holder uses model of flat quick-coupling clip, which enables its rapid insertion on belt with one hand only without unbuckling the belt. However, the distance between the belt and holster is smaller with this type of clip. The holder can be rotated in respect to the belt by full circle of 360 degrees with 16 locking positions. It can be fastened also to the supporting M.O.L.L.E. system.

 

Flashlight + SH

 

 LHU-SH-04-35 or LHU-SH-04-38 Double plastic swivelling holder for tactical police flashlights and for defensive spray

LHU-SH-04


LHU-SH-04-35 or LHU-SH-04-38: Double plastic swivelling holder consists of the holders LHU-04 (for flashlight) and the holder SH-04 (for defensive spray) connected by special adaptor. Advantage of this solution consists in saving the space on the belt. Constant position of the flashlight and spray improves orientation on the belt when choosing the appropriate device. Both holders rotate in respect to the belt simultaneously, while their mutual position remains unchanged. The adaptor makes it possible to accommodate easily the holders for carrying on the right or left side. Fastening clip ensures its fast fixation on the belt with one hand only without necessity of unbuckling the belt.  The holder can be rotated in respect to the belt by full circle of 360 degrees with 16 locking positions. Type LHU-SH-04-35 has been designated for defensive sprays with vessel diameter 35 mm (manufactured mainly in Europe), type LHU-SH-04-38 has been designated for vessel diameter 38 mm (manufactured mainly in USA).

 

 LHU-SH-14-35 or LHU-SH-14-38 Double plastic swivelling holder for tactical police flashlights and for defensive spray

LHU-SH-14


LHU-SH-14-35 or LHU-SH-14-38: Double plastic swivelling holder consists of the holders LHU-14 (for flashlight) and the holder SH-14 (for defensive spray) connected by special adaptor. Advantage of this solution consists in saving the space on the belt. Constant position of the flashlight and spray improves orientation on the belt when choosing the appropriate device. Both holders rotate in respect to the belt simultaneously, while their mutual position remains unchanged. The adaptor makes it possible to accommodate easily the holders for carrying on the right or left side. This type of holder uses model of flat quick-coupling clip, which enables its rapid insertion on belt with one hand only without unbuckling the belt. However, the distance between the belt and holster is smaller with this type of clip. The holder can be rotated in respect to the belt by full circle of 360 degrees with 16 locking positions. It can be fastened also to the supporting M.O.L.L.E. system. Type LHU-SH-14-35 has been designated for defensive sprays with vessel diameter 35 mm (manufactured mainly in Europe), type LHU-SH-14-38 has been designated for vessel diameter 38 mm (manufactured mainly in USA). 

 

 LH-SH-04-35 or LH-SH-04-38 Double plastic swivelling holder for tactical police flashlights and for defensive spray

LH-SH-04


LH-SH-04-35 or LH-SH-04-38: Double plastic swivelling holder consists of the holders LH-04 (for flashlight) and the holder SH-04 (for defensive spray) connected by special adaptor. Advantage of this solution consists in saving the space on the belt. Constant position of the flashlight and spray improves orientation on the belt when choosing the appropriate device. Both holders rotate in respect to the belt simultaneously, while their mutual position remains unchanged. The adaptor makes it possible to accommodate easily the holders for carrying on the right or left side. Fastening clip ensures its fast fixation on the belt with one hand only without necessity of unbuckling the belt.  The holder can be rotated in respect to the belt by full circle of 360 degrees with 16 locking positions. Type LH-SH-04-35 has been designated for defensive sprays with vessel diameter 35 mm (manufactured mainly in Europe), type LH-SH-04-38 has been designated for vessel diameter 38 mm (manufactured mainly in USA).

 

 LH-SH-14-35 or LH-SH-14-38 Double plastic swivelling holder for tactical police flashlights and for defensive spray

LH-SH-14


LH-SH-14-35 or LH-SH-14-38: Double plastic swivelling holder consists of the holders LH-14 (for flashlight) and the holder SH-14 (for defensive spray) connected by special adaptor. Advantage of this solution consists in saving the space on the belt. Constant position of the flashlight and spray improves orientation on the belt when choosing the appropriate device. Both holders rotate in respect to the belt simultaneously, while their mutual position remains unchanged. The adaptor makes it possible to accommodate easily the holders for carrying on the right or left side. This type of holder uses model of flat quick-coupling clip, which enables its rapid insertion on belt with one hand only without unbuckling the belt. However, the distance between the belt and holster is smaller with this type of clip. The holder can be rotated in respect to the belt by full circle of 360 degrees with 16 locking positions. It can be fastened also to the supporting M.O.L.L.E. system. Type LH-SH-14-35 has been designated for defensive sprays with vessel diameter 35 mm (manufactured mainly in Europe), type LH-SH-14-38 has been designated for vessel diameter 38 mm (manufactured mainly in USA)

esp-top-logo

 Address Hyacintová 20, CZ 106 00  Prague 10, Czech Republic 
   
Telephone

+420 777 720 816  |  +420 777 720 813

   
E-mail


 

 

Facebook YouTube Google+

All rights reserved © Euro Security Products s.r.o. (Ltd.), 1992 – 2017

This online pressentation uses cookies and similar technologies, which help us deliver our services. By interacting with this site, you agree to our use of cookies.