Baton + SHT
BH-SHT-04 Double plastic swivelling holder for the lengths of expandable baton 16", 18" or 21" and for defensive spray
BH-SHT-05 Double plastic swivelling holder for the lengths of expandable baton 21", 23" or 26" and for defensive spray
BH-SHT-04 or BH-SHT-05: Double plastic swivelling holder consists of the holders BH-04 or BH-05 (for baton) and the holder SHT-04 (for defensive spray) connected by special adaptor. Advantage of this solution consists in saving the space on the belt. Constant position of the baton and spray improves orientation on the belt when choosing the appropriate device. Both holders rotate in respect to the belt simultaneously, while their mutual position remains unchanged. The adaptor makes it possible to accommodate easily the holders for carrying on the right or left side. Fastening clip ensures its fast fixation on the belt with one hand only without necessity of unbuckling the belt. The holder can be rotated in respect to the belt by full circle of 360 degrees with 16 locking positions.
BH-SHT-14 Double plastic swivelling holder for the lengths of expandable baton 16", 18" or 21" and for defensive spray
BH-SHT-15 Double plastic swivelling holder for the lengths of expandable baton 21", 23" or 26" and for defensive spray
BH-SHT-14 or BH-SHT-15: Double plastic swivelling holder consists of the holders BH-14 or BH-15 (for baton) and the holder SHT-14 (for defensive spray) connected by special adaptor. Constant position of the baton and spray improves orientation on the belt when choosing the appropriate device. Both holders rotate in respect to the belt simultaneously, while their mutual position remains unchanged. The adaptor makes it possible to accommodate easily the holders for carrying on the right or left side. This type of holder uses model of flat quick-coupling clip, which enables its rapid insertion on belt with one hand only without unbuckling the belt. However, the distance between the belt and holster is smaller with this type of clip. It can be fastened also to the supporting M.O.L.L.E. system. The holder can be rotated in respect to the belt by full circle of 360 degrees with 16 locking positions
SH-21-SHT-04 Double plastic swivelling holder for the lengths of expandable baton 16", 18" or 21" and for defensive spray
SH-21-SHT-04: Double plastic swivelling holder consists of the holders SH-21 (for baton) and the holder SHT-04 (for defensive spray) connected by special adaptor. Advantage of this solution consists in saving the space on the belt. Constant position of the baton and spray improves orientation on the belt when choosing the appropriate device. Both holders rotate in respect to the belt simultaneously, while their mutual position remains unchanged. The adaptor makes it possible to accommodate easily the holders for carrying on the right or left side. Fastening clip ensures its fast fixation on the belt with one hand only without necessity of unbuckling the belt. The holder can be rotated in respect to the belt by full circle of 360 degrees with 16 locking positions.
SH-121-SHT-14 Double plastic swivelling holder for the lengths of expandable baton 16", 18" or 21" and for defensive spray
SH-121-SHT-14: Double plastic swivelling holder consists of the holders SH-121 (for baton) and the holder SHT-14 (for defensive spray) connected by special adaptor. Constant position of the baton and spray improves orientation on the belt when choosing the appropriate device. Both holders rotate in respect to the belt simultaneously, while their mutual position remains unchanged. The adaptor makes it possible to accommodate easily the holders for carrying on the right or left side. This type of holder uses model of flat quick-coupling clip, which enables its rapid insertion on belt with one hand only without unbuckling the belt. However, the distance between the belt and holster is smaller with this type of clip. It can be fastened also to the supporting M.O.L.L.E. system. The holder can be rotated in respect to the belt by full circle of 360 degrees with 16 locking positions.
Baton + SH
BH-SH-04-35 or BH-SH-04-38 Double plastic swivelling holder for the lengths of expandable baton 16", 18" or 21" and for defensive spray
BH-SH-05-35 or BH-SH-05-38 Double plastic swivelling holder for the lengths of expandable baton 21", 23" or 26" and for defensive spray
BH-SH-04 or BH-SH-05: Double plastic swivelling holder consists of the holders BH-04 or BH-05 (for baton) and the holder SH-04 (for defensive spray) connected by special adaptor. Advantage of this solution consists in saving the space on the belt. Constant position of the baton and spray improves orientation on the belt when choosing the appropriate device. Both holders rotate in respect to the belt simultaneously, while their mutual position remains unchanged. The adaptor makes it possible to accommodate easily the holders for carrying on the right or left side. Fastening clip ensures its fast fixation on the belt with one hand only without necessity of unbuckling the belt. The holder can be rotated in respect to the belt by full circle of 360 degrees with 16 locking positions. Type BH-SH-04-35 or BH-SH-05-35 has been designated for defensive sprays with vessel diameter 35 mm (manufactured mainly in Europe), type BH-SH-04-38 or BH-SH-05-38 has been designated for vessel diameter 38 mm (manufactured mainly in USA).
BH-SH-14-35 or BH-SH-14-38 Double plastic swivelling holder for the lengths of expandable baton 16", 18" or 21" and for defensive spray
BH-SH-15-35 or BH-SH-15-38 Double plastic swivelling holder for the lengths of expandable baton 21", 23" or 26" and for defensive spray
BH-SH-14 or BH-SH-15: Double plastic swivelling holder consists of the holders BH-14 or BH-15 (for baton) and the holder SH-14 (for defensive spray) connected by special adaptor. Constant position of the baton and spray improves orientation on the belt when choosing the appropriate device. Both holders rotate in respect to the belt simultaneously, while their mutual position remains unchanged. The adaptor makes it possible to accommodate easily the holders for carrying on the right or left side. This type of holder uses model of flat quick-coupling clip, which enables its rapid insertion on belt with one hand only without unbuckling the belt. However, the distance between the belt and holster is smaller with this type of clip. It can be fastened also to the supporting M.O.L.L.E. system. The holder can be rotated in respect to the belt by full circle of 360 degrees with 16 locking positions. Type BH-SH-14-35 or BH-SH-15-35 has been designated for defensive sprays with vessel diameter 35 mm (manufactured mainly in Europe), type BH-SH-14-38 or BH-SH-15-38 has been designated for vessel diameter 38 mm (manufactured mainly in USA).
SH-21-SH-04 Double plastic swivelling holder for the lengths of expandable baton 16", 18" or 21" and for defensive spray
SH-21-SH-04: Double plastic swivelling holder consists of the holders SH-21 (for baton) and the holder SH-04 (for defensive spray) connected by special adaptor. Advantage of this solution consists in saving the space on the belt. Constant position of the baton and spray improves orientation on the belt when choosing the appropriate device. Both holders rotate in respect to the belt simultaneously, while their mutual position remains unchanged. The adaptor makes it possible to accommodate easily the holders for carrying on the right or left side. Fastening clip ensures its fast fixation on the belt with one hand only without necessity of unbuckling the belt. The holder can be rotated in respect to the belt by full circle of 360 degrees with 16 locking positions. Type SH-21-SH-04-35 has been designated for defensive sprays with vessel diameter 35 mm (manufactured mainly in Europe), type SH-21-SH-04-38 has been designated for vessel diameter 38 mm (manufactured mainly in USA).
SH-121-SH-14 Double plastic swivelling holder for the lengths of expandable baton 16", 18" or 21" and for defensive spray
SH-121-SH-14: Double plastic swivelling holder consists of the holders SH-121 (for baton) and the holder SH-14 (for defensive spray) connected by special adaptor. Constant position of the baton and spray improves orientation on the belt when choosing the appropriate device. Both holders rotate in respect to the belt simultaneously, while their mutual position remains unchanged. The adaptor makes it possible to accommodate easily the holders for carrying on the right or left side. This type of holder uses model of flat quick-coupling clip, which enables its rapid insertion on belt with one hand only without unbuckling the belt. However, the distance between the belt and holster is smaller with this type of clip. It can be fastened also to the supporting M.O.L.L.E. system. The holder can be rotated in respect to the belt by full circle of 360 degrees with 16 locking positions. Type SH-121-SH-14-35 has been designated for defensive sprays with vessel diameter 35 mm (manufactured mainly in Europe), type SH-121-SH-14-38 has been designated for vessel diameter 38 mm (manufactured mainly in USA).
